Felco Roller Compaction Buckets allow an excavator operator to backfill open trench spoils and compact them with one attachment – by combining the compaction performance of Felco’s proven tamping pad wheel compactor within an excavator bucket shell.
Transition time switching between a digging bucket and a stand-alone wheel compactor is eliminated, adding up to significant time savings on long pipe jobs. Excavator operators are able to lay more uniform, compaction appropriate lifts with the Roller Compactor attachment, and they consistently report achieving 90% + compaction with the Felco Roller Compaction Bucket on projects throughout the U.S. and Canada.
Felco’s Sealed Journal Bearing System requires NO DAILY MAINTENANCE and is supported by an industry best FIVE YEAR LIMITED WARRANTY.
Just grab and lay out your lift, curl in the bucket, and compact!
(W” x L”)
|Sealed Journal Bearing|
|16,000 – 26,000|
|18″ x 40″||850||0.2||SJB-I|
|24″ x 40″||900||0.3||SJB-I|
|30″ x 40″||1125||0.4||SJB-I|
|26,000 – 34,000|
|18″ x 48″||1275||0.3||SJB-F|
|24″ x 48″||1400||0.4||SJB-F|
|30″ x 48″||1550||0.5||SJB-F|
|34,000 – 45,000|
|18″ x 48″ HD||1700||0.3||SJB-E|
|24″ x 48″ HD||1800||0.4||SJB-E|
|30″ x 48″ HD||2100||0.5||SJB-E|
|45,000 – 58,000|
|18″ x 60″||2075||0.5||SJB-E|
|24″ x 60″||2275||0.7||SJB-E|
|30″ x 60″||2500||1.0||SJB-E|
|36″ x 60″||2825||1.2||SJB-H|
|58,000 – 100,000|
|24″ x 74″||3025||1.0||SJB-E|
|30″ x 74″||3400||1.4||SJB-E|
|36″ x 74″||3750||1.6||SJB-H|
|70,000 & Up|
|42″ x 74″||4350||2.1||SJB-H|
|48″ x 74″||4900||2.4||SJB-H|
|60″ x 60″||4783||2.0||SJB-H|
|100,000 & Up|
|60″ x 74″||5498||2.4||SJB-H|
Available from 40mm to 130mm diameters
Bolt-On Cutting Edges
Extend the life of your Felco bucket lip with a replaceable cutting edge
Replaceable Scraper Teeth / Adapters
Worn scraper teeth are easy to remove and replace. Scraper teeth keep the wheel clean and will improve the performance of your compaction attachment.
Felco can send a set of replacement pin-on ears for your current Felco bucket, to use your attachment on a different, similar class excavator. Please provide the serial # on the Roller Bucket which is located between the current set of ears, and the Make / Model of the excavator that you want the new ears to mount on.
To confirm ear dimensions, please click on this Ear Dimensions Confirmation Sheet.
For sizing and pricing questions, please call our Parts Department at 800-221-5427, then press 1.